The new 6696 billet flywheel for the Hemi Predator from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your racing engine, while still moving enough air for cooling. Less air drag on the flywheel means more power freed up throughout the power curve, especially on the top end. This flywheel is designed for oval track or drag racing. Will work with stock pull rope and OEM coil.
This flywheel will have the same basic set up as the 6626. This flywheel also has a minimum coil gap of .030 as all our other flywheels do, meaning DO NOT set the gap closer than .030. However you can use .050 to .075 in most cases. The magnets in our flywheels are very strong and opening up the coil gap will help reduce magnet drag as the magnet moves underneath the coil. This is yet another advantage to our flywheels that will help free up more power in these engines.
This new 6696 flywheel has more power making potential than any other approved flywheel on the market. Our test as well as testing from other reputable companies shows it will make around the same power with zero tape on the blower housing as the 6626 does with the blower housing fully taped up.
Flywheel is set to 32 degrees BTDC with a stock key.
Minimum coil gap .030 Weight 3.4lbs.
Torque to 65 ft/lbs
***Will Not fit the Honda/Clone or Non Hemi cranks***
***Will Not fit the Tillotson or Ducar 212 Hemi engine***
***Will Not work with charging stator***