6058 Billet Side Cover for the 212 Non-Hemi Predator Engine
This side cover has the attention to detail and good looks that have come to be expected of ARC's billet products. It features side-by-side dual ball bearings that support the crank and give it another fulcrum point to help eliminate any crankshaft flexing. It has an integral O-ring along the perimeter in its machined groove that guarantees a good seal. 4 solid pin receptacles mate with solid dowels to increase mating shear strength. Bronze bushing (with ARC's advanced oil system) support for the camshaft main increases strength and minimizes potential for wear. It has 2 venting holes at the top with 1/8" NPT plugs. It also has 2 oil fill ports with billet ARC aluminum hand-tighten plugs. Another useful feature is the threaded holes over the side dowel pins so that small bolts (included) can be used to push the side cover for easy removal.
-
Includes: Bearings, seal, gasket, O-ring, plugs, caps, and installation hardware
- Fits non-hemi Predators (with stamped valve covers). Will not fit GX200, GX160, 6.5 Clone OHVs, or Hemi Predators (Model 60363 [210FA] that came with cast aluminum valve cover - use same part as GX200 for this motor).
Important: Due to variations in clone blocks, you may find that the side cover is not quite lining up with all four dowel pins. Try removing the bottom dowel pin if you encounter difficulty.
